Acutel Inc.

Specifications:

Interface:

   ¼” headphone jack w/ 10” cord (to connect to pilot headphones)

   ¼” headphone plug w/ 10” cord (to connect to aircraft audio)

   9-pin connector for oximeter sensor

               Optional interface connection for headphones:
               
               6-pin Lemo^® jack (to connect to pilot headphones)

               6-pin Lemo^® plug (to connect to aircraft audio)

Alerts:

                Audible-

                    “Caution” for oxygen saturation 90% to 86%

                    “Warning” for oxygen saturation 85% and below

                    “Caution” for oximeter sensor disconnected (immediate) and/or finger removed from sensor (after 90 seconds)

                    “Caution” for low battery condition

                Visual-

                    Red LED to indicate low battery

Controls:

                On/Off slide switch

                Pushbutton for manual SpO₂ check

                Volume adjustment

Each order consists of:

    1 OWL aviation alert oximeter

                1 articulated finger clip oximeter sensor with 2 meter cable OR
    1 reflectance sensor for use in headband

                2 “AA” alkaline batteries

                1 Instruction sheet

Optional Accessories:

                Reflectance sensor-- for use in headband

To download this file as a .pdf -- click here